Results 1-10 of 15

Presses

Used presses.

Grid
List

Results per page

Used Diverso Pinch Press 60" Width Capacity

Used Diverso Pinch Press. 60" width capacity, manual opening adjustment from 0 to 4", drive motor approx. 1-1/2HP, reversing drum switch, 115/230 volt, single phase.

Manufacturer: Diverso

Item #: 11146

More Info

List Price: $2,500.00

Price: $2,500.00

Qty

51" WIDE PNEUMATIC ROTARY PINCH ROLL PRESS

Used Midwest Automation Model PR-1300 51" wide Pneumatic Rotary Pinch Roll Press; having a pneumatically loaded top roll with a fixed bottom roller which is chain driven; rollers are rubber-covered; with a hand-wheel operated panel thickness control with pointer and scale; with a feed motor delivering a feed rate of 36 FPM and with electrical controls wired for AC 3/60/230 volt operation; with infeed and outfeed PVC coated rollers; infeed safety bar and protective cover and with all related equipment. Serial Number: 104-9703.

Manufacturer: Midwest Automation

Item #: PR020006486

More Info

List Price: $4,650.00

Price: $4,650.00

Qty

3D LAMINATING PRESS

210007 (1) ITALPRESSE Model LOCKFORM, 3D Laminating Press, s.n. 138000903, new in 2003, the LOCKFORM utilizes both vacuum below the film and positive air pressure above the film to form the film into even the most detailed profiles with superior definition. Deep, intricate profiles and recessed finger pulls are no problem for the LOCKFORM.

? Heating platen dimensions 1,450 x 2,800 mm (57” x 110”)
? Maximum useful lamination area 1,250 x 2,600 mm (49” x 102”)
? Maximum working thickness (Panel + Pedestal) 55 mm (2.17”)
? PVC foil width 1,420 -1,450 mm (55.9” – 57”)
? Total laminating pressure 230 metric tons (253 US tons)
? Maximum positive air pressure 6 bar (85 psi)
? Maximum platen temperature 150o C (302o F)
? Press weight 13,000 kg (28,600 lbs)
? Voltage 480 volts, 3 phase, 60 cycle

This machine is equipped with:

? The press frames are flame cut from solid steel plates, CNC machined and assembled without welding to assure reliable sealing of the forming chamber and eliminate structural failure due to fatigue stressed welds.
? The press is equipped with a massive aluminum upper heating platen constructed with two levels of electrical resistance heating elements and channels for circulation of thermal oil assuring maximum uniformity in platen temperature. The platen also has channels for preheating the positive air charge. The surface is black anodized to maximize the radiant qualities of the platen. The platen temperature is precisely controlled by dual digital thermostatic controls.
? The press features ITALPRESSE’S wedge locking system providing reliable sealing of the forming chamber while eliminating the need for high tonnage press cylinders. The press is opened and closed and the forming chamber locked by small hydraulic cylinders powered by a low-pressure hydraulic gear pump.
? The forming chamber is sealed with o-ring seal actuated by air pressure that automatically compensates for different foil thickness.
? The machine has two tray loading stations installed on opposite ends of the press. Each station is equipped with an aluminum shuttle tray and automatic movement of the tray in and out of the press. This configuration allows one tray to be in the press while the other is being unloaded and reloaded or both trays out of the press for loading access.
? High efficiency vacuum pump with a 1000-liter vacuum accumulator tank
? Elcon industrial PC control system running on Microsoft Windows based software equipped with a color graphic touch screen to set, control, and monitor all machine functions, cycle times, platen temperature, pressures, and storage of programs by alpha-numeric codes. A modem is provided for on-line remote troubleshooting.
? Thermoformed ABS safety enclosure with gull-wing entry doors on all four sides of the press for easy maintenance access.
? (2) pneumatic operated cut-off devices for parting the foil from the roll installed on both tray stations.

Today’s replacement cost $214,200
PRICE FOB Punta Gorda, FL - fully refurbished by Italpresse USA $95,500.00

Manufacturer:

Item #: PR030004154

More Info

List Price: $95,500.00

Price: $95,500.00

Qty

MERCURY MEMBRANO DUO 49 MEMBRANE PRESS

# Mercury vacuum press thermal foil machine combination
# Unit has 2 tables 49 " x 49" linked together with a usable platen dimension of 46" x 46" when laminating top and edge profiles
# Maximum material height 2.5 "
# Part Lay-Up work table is composed of 3/8 " cast and ground aluminum with bottom vacuum platens.
# 3HP, 220V, 3PH vacuum pump with speed control
# Approx. 10 Gallon surge tank

# Bulb heating unit is a 48 " x 48 " overhead electrical heating enclosure that slides back and forth over the layup area with a vacuum cycle that switches back and forth also, after the completed cycle.
# Heat Enclosure with black phase infrared heating elements with insulated top, 160-280 degree temperature range.
# Digital Temperature controller with LED readout.
# Timed press cycle with audible alarm
# Average cycle time on 12-mil thick PVC laminate 3-4 minutes. When one section of the press is in a cycle this allows the other side free for cooling and unloading/loading of parts.

Manufacturer: A & S

Item #: PR160005600

More Info

List Price: $4,195.00

Price: $4,195.00

Qty

INFRARED HEATED ROTARY PRESS / PINCH ROLLER

Originally manufactured 1973, very clean. Came out of a plant that shut down. Can be cleaned checked further. Can be reconditioned for an additional cost.
•60 " working width
•Upper elevator opens 0 - 4.5 ", Constant passline machine
•Thickness dial indicator
•12 KW, 480V Infra red roll heating system with temperature indicator and control
•8.75 " Dia. upper and lower rolls deliver 8,000 lbs of combining pressure. Neoprene or equivalent covered 40 Durometer
•Smooth rubber covered upper holddown rolls, (2) 3.5 ", approx. 65 Durometer, one each for the infeed and outfeed

•Smooth rubber covered lower feed rolls, (2) 3.5 " approx. 65 durometer, one each for the infeed and outfeed
•Quick open roll actuation control
•Overhead web tension / take up rolls. 3.5 "
hard rubber, 6.5 Chrome plated roll •Motor, handwheels, operating controls on right end
• Variable frequency drive feed integrated with 1HP 480 Volt motor.
• Feed speed range of 25-125FPM.
•Safety reversing bar, safety guards, warning label/safety kit.

Manufacturer:

Item #: PR160006285

More Info

List Price: $11,500.00

Price: $11,500.00

Qty

COMPLETE LAMINATION LINE

This complete lamination line includes a Black Brothers 72” wide double sided glue spreader with scissor lifts on each side for efficient material handling. There are two adjustable end loading cold presses. The Black Brothers press has a single 6’ x 10’ platen and is an end loading configuration. The Tyler press is also adjustable and has a 5’ x 12’ split platen, end loading configuration. Material handling carts between the layup station and presses are also included.

Manufacturer: Black Bros

Item #: PR170006526

More Info

List Price: $89,500.00

Price: $89,500.00

Qty

FERGUSON ADJUSTABLE PRESS

1-EA. USED FERGUSON SIDE LOADING AIR OPERATED COLD PRESS. WITH OVERALL CAPACITY OF 62' X 122". WITH FOUR (4) PLATENS EACH 30" X 62". WITH MOTORIZED ADJUSTABLE DAYLIGHT OPENING FROM 5" TO 50". WITH EIGHT (8) EA. AIR LOADED POP UP ROLLER TRACKS IN PRESS BED. FOR OPERATION ON 240/60/3. CLEANED AND CHECKED.

Manufacturer: Miscellaneous

Item #: PR260004489

More Info

List Price: $26,500.00

Price: $26,500.00

Qty

SHAW ALMEX MEMBRANE PRESS

1-EA.USED SHAW ALMEX MODEL TL4-8 THERMOFORMING PRESS. WITH 48" X 96" CAPACITY. WITH TWO (2) SHUTTLE TABLES. COMPLETE WITH HEATING UNIT AND VACUUM UNIT. FOR OPERATING ON 480/60/3. MACHINE IS HOOKED UP FOR DEMONSTRATION. 1995 MACHINE. AS TAKEN FROM SERVICE.

Manufacturer: Shaw Almex

Item #: PR260006197

More Info

List Price: $32,500.00

Price: $32,500.00

Qty